Qianyu supplies Volvo truck bearings for wheel hub and axle applications across a range of Volvo commercial vehicles. Our product range includes truck wheel bearings, hub bearings and heavy-duty bearing solutions referenced by Volvo OE numbers, bearing numbers and common aftermarket cross-reference numbers.

Available references include 805532, 611766, 568879, 566427.H195, 566426.H195, VKBA5407, VKBA5424, VKBA5425 and other wheel-end bearing models.

If you are sourcing replacement bearings for Volvo FH, FM, FMX or related commercial vehicle platforms, you can send us the truck model, OE number, bearing number or dimensions for product identification.

Volvo Truck Wheel Bearings for Heavy-Duty Applications

Wheel-end bearings on commercial trucks operate under high radial and axial loads, frequent braking cycles and long operating hours. For distributors and truck spare-parts suppliers, selecting the correct Volvo truck wheel bearingtherefore depends on more than bearing dimensions alone.

The correct replacement should match the original application in terms of:

• Inner diameter, outer diameter and overall width

• Bearing structure and internal geometry

• Front or rear axle position

• Load requirements

• Seal and lubrication configuration

• OE and aftermarket reference numbers

Our Volvo bearing range is intended for replacement and aftermarket supply where accurate fitment and consistent wheel-end performance are required.

Bearings for Volvo FH, FM and Other Truck Models

Volvo commercial vehicles use different wheel bearing specifications depending on vehicle generation, axle configuration and wheel position.

Our range covers bearing references associated with Volvo truck and bus applications including FH, FM and other heavy-duty Volvo platforms.

Typical sourcing requests include:

Volvo FH Wheel Bearings

Volvo FH trucks are widely used for long-distance and heavy-haul transportation. Wheel bearings for these applications need to support high axle loads and extended operating cycles.

Customers commonly search for products using terms such as:

• Volvo FH wheel bearing

• Volvo FH12 wheel bearing

• Volvo FH16 wheel bearing

• Volvo FH front wheel bearing

• Volvo FH rear wheel bearing

For accurate selection, provide the OE number or existing bearing reference whenever possible.

Volvo FM Wheel Bearings

Volvo FM trucks are used across regional distribution, construction and general transport applications. Depending on axle and model configuration, different wheel hub bearing references may be required.

We can assist with Volvo FM wheel bearing selection based on model information, OE reference or bearing dimensions.

Volvo FMX and Heavy-Duty Applications

For construction and demanding operating environments, wheel-end components may be exposed to repeated heavy loading, road contamination and long service cycles.

When sourcing bearings for Volvo FMX or similar heavy-duty applications, you should confirm both the vehicle model and axle position before placing a bulk order.

Features and Benefits

• Precision Design: Ensures accurate dimensions for a perfect fit.

• Corrosion Resistant: Durable in tough environments, extending service life.

• High Efficiency: Known for high speed and minimal friction, improving vehicle performance.

• Flawless Finish: Superior craftsmanship for enhanced reliability.

How to Maintain Volvo Truck Bearings

To ensure optimal performance, it’s important to use the right amount of lubrication. Volvo truck bearings require a balanced amount of grease—too much can affect performance, while too little may cause premature wear. For best results, follow manufacturer recommendations and contact our engineers for further technical guidance.

The above methods are provided by our engineers, if you need more technical guidance, please contact us immediately!

Front and Rear Wheel Bearing Selection

A Volvo truck may use different bearings on the front and rear wheel positions.

Before ordering, confirm whether you need a:

Front Wheel Bearing
Typically associated with steering axle wheel-end applications.

Rear Wheel Bearing
Typically used on drive or trailing axle wheel ends depending on vehicle configuration.

The same Volvo truck series can use different bearing references according to axle type, production year and specification, so the model name alone should not be treated as the final identification method.

FAQ About Volvo Truck Bearings

What information should I provide to find the correct Volvo truck bearing?

The preferred information is the Volvo OE number or existing bearing number. You can also provide the truck model, production year, axle position, bearing dimensions and photos of the original part.

Do you supply Volvo FH wheel bearings?

Our range includes bearing references used for Volvo FH-related truck applications. Because specifications can vary by generation and axle, please provide the OE number or current bearing reference for confirmation.

Can you match Volvo bearings by VKBA number?

Yes. The current product range includes cross-references such as VKBA5407, VKBA5408, VKBA5409, VKBA5415, VKBA5424 and VKBA5425. Send us your reference number for matching.

Can I search by Volvo OE number?

Yes. OE number matching is one of the preferred methods for selecting replacement truck bearings. Send the complete number together with the truck model whenever available.

Do Volvo front and rear wheel bearings use the same part number?

Not necessarily. Bearing specifications can differ according to front or rear axle position, axle configuration, model generation and vehicle specification. Always confirm the application before ordering.

Do you supply bearings for truck brands other than Volvo?

Yes. Qianyu Auto also supplies truck hub bearing products for Scania, DAF, Mercedes-Benz, Renault, MAN and other commercial vehicle applications

Why Choose Us as Your Volvo Truck Bearings Supplier?

If you need reliable Volvo truck bearings, you’re in the right place! At Qianyu Auto, we offer a wide range of bearings from top brands, including Scania, DAF, Benz and more.

• Experienced Supplier: Years of expertise in producing and supplying high-quality truck bearings, with exports to South America, Europe, and the Middle East.

• Latest Technology: We constantly update our production processes to stay ahead in the industry.

• Certifications: Our products meet international standards, including ISO/TS16949, ISO9001, and CE.

• Strict Quality Control: All products undergo rigorous testing to ensure top performance.

Contact Us Today for Your Volvo Truck Bearings Needs