568879 631903.H195 21102685 F200035

This wheel end kit is a matched pair of front-axle tapered roller bearings for Volvo FH4, FM4 and FMX trucks, built to replace OEM Volvo 21102685/21363715 and Renault Trucks 7421102685/7421363715 (Volvo Group shares this axle platform across both brands). It cross-references to FAG 568879, FAG 631903.H195, FEASA F 200035 and DT Spare Parts 2.96230. The kit is supplied pre-greased and sealed, ready to press into the hub — it is a matched set, not a single bearing.

Product Type: Wheel End Kit vs. Hub Unit vs. Single Bearing

A wheel end kit like this one pairs an inner and outer tapered roller bearing, factory-lubricated and sealed as one unit, so the workshop fits a calibrated pair instead of two loose bearings by hand. Looking for an integrated hub with built-in ABS sensor and flange instead? See our Hub Unit Bearings or Wheel Hub Assembly ranges. For loose bearings only, see Tapered Roller Bearing.

Features & Benefits

·Direct OEM Fit: Designed specifically to match Volvo OEM numbers 21102685 / 21363715, ensuring seamless compatibility and correct installation.

·Heavy‑Duty Construction: Manufactured with high‑strength materials to withstand demanding load and operating conditions typical in commercial trucking.

·Pre‑Greased & Sealed: Ready‑to‑install with high‑performance grease and protective seals, reducing maintenance and enhancing durability.

·Reliable Performance: Built to support stable rotation and reduce vibration at the wheel end, contributing to smoother driving and longer service life.

OEM part numbers                                                                                                        

Vehicle & Axle Fitment

Fits Volvo FH4, FM4 and FMX front axles. Because Volvo Group builds Renault Trucks on shared platforms, this kit also covers the Renault Trucks OE numbers above. Always confirm against your VIN, axle type or the OE number on the old bearing before ordering — several visually similar Volvo wheel-end kits exist with different total widths and bore sizes for different axle generations.

This Kit vs. Other Volvo Wheel-End Kits

Volvo uses more than one wheel-end kit design across its range, distinguished mainly by bore, outer diameter and total width. Compare before ordering; see the full Volvo truck bearings range for more options.

Customization

We can produce this kit to your drawing or sample and support OEM/private-label packaging with your brand printed on the box or the product. Tell us the material/steel grade standard, tolerance class, seal type, grease brand/quantity and packaging requirement, and we'll confirm feasibility with your RFQ.

Compatible Volvo Truck Applications

The correct bearing selection depends on OE number matching and vehicle configuration. This Volvo truck hub bearing is commonly used for heavy-duty Volvo truck wheel applications.

FITTS  FOR  VOLVO   

 FH4/FM4/FMX

Product advantages

Longfei bearing's truck hub bearings provide an advanced replacement solution. It consists of a set of two pre-set high-precision bearings, which are suitable for various industrial vehicle applications.

Truck hub bearings are packed with high quality grease before leaving the factory, which can guarantee good performance even under the most severe conditions.

These products combine the patented solutions of Longfei bearing to improve the installation efficiency of bearings and seals, so as to ensure that they are assembled into the hub and calibrated with the correct torque.

FAQ

Q: Are the two bearings in this kit interchangeable with each other?

A: No. They have different bore diameters and are matched as a pre-set pair — always install and replace them together.

Q: Does this kit fit both Volvo and Renault Trucks?

A: Yes, both brands share this axle platform, but please confirm your exact OE number or VIN before ordering.

Q: Can you supply this with our own packaging or brand?

A: Yes, we support OEM and private-label packaging based on your requirements.

Q: Is a sample available before a bulk order?

A: Yes, we can supply a free sample; the buyer covers the courier cost.

Q: What's the MOQ?A: 1 piece.

Q: Is the kit already greased, or do we need to add grease before installation?

A: The kit is pre-greased and sealed at the factory and is ready to install.

Q: What information do you need to give us an accurate quotation?

A: See "Preparing Your RFQ" above — OE/cross number, VIN/axle type, quantity, ABS requirement, drawing/sample if custom, packaging needs and destination.

Quality assurance

Truck hub bearings are normally used for more than 300000 km

All products are 100% tested before delivery

Contact Us

Our working time is 08:00-18:00 from Monday to Friday in Beijing Time. 

All emails will be replied in 24 hours,Because of the time difference, we  may not reply your 

email immediately or have a little delay due to the weekend or holiday. 

Pleaseunderstand that. 

We devote to making the best service for you. We look forward to serving you.

Any questions, please contact us directly or via our email. 

Your emails are warmly welcomed.

Packaging and transportation